Santi Heated Flex 2.0 Undersuit – Made to Measure

From: £528.33 + VAT

SKU: 2045.MTM.M Category:

The Santi Heated Flex 2.0 Undersuit – Made to Measure is designed for divers who need a lightweight, flexible, and efficient heating solution. The Climashield Contour fabric provides full flexibility and superior mobility, making it an ideal choice for divers who require less bulk and more comfort compared to the BZ400 Heated Undersuit.

Ideal for Shorter Dives or Warmer Waters

The Santi Heated Flex 2.0 Undersuit is recommended for those looking for a thinner heating alternative, especially for shorter dives in cold water or longer dives in warmer conditions. It works as part of the complete Santi heating system, which includes options like the BZ400 Heated Undersuit, Heated Vest, Heated Gloves, and Santi 6Ah and 24Ah batteries, along with the new Blue Power 14Ah and 28Ah batteries.

Optimal Thermal Comfort

The Flex 2.0 Undersuit features efficient heating wires that provide optimal warmth during extended cold dives. The heat generated is directed efficiently toward the diver’s body for the best thermal comfort. The new non-quilted fabric quality ensures better thermal properties, keeping the heat closer to the body for longer periods.

Proper Wear and Safety

To ensure optimal comfort and performance, it is recommended to wear the Santi Heated Flex 2.0 Undersuit over a thin thermal base layer. The heating system is not intended for direct skin contact due to safety and hygiene reasons.

To operate the Santi Heating System, a Santi Drysuit Connector or Thermovalve 303 is required.

Santi Heated Flex 2.0 Undersuit Specifications:

  • Operating Time on 24Ah Battery: Approximately 2h 30min – 3h
  • Built-in Heating Glove Wires
  • Handy Waist Pocket for power cord storage
  • P-valve Hose Opening for easy integration
  • Net Cuffs with Rubber Loops for Thumbs
  • Elastic Gussets under the armpits for enhanced comfort
  • Two Side Pockets for storage
  • Elastic Waistband for a secure fit
  • Two-Way Entry Zipper for convenience
  • Foot Straps to keep the undersuit in place
  • Maximum Heating Temperature: 45ºC
  • Heating Power: 110W
  • Climashield Contour 180g/m² Thermal Insulation
  • Safety Switch to prevent overheating
  • Ultra-soft Silicone-coated Wires resistant to breaking
  • Power Cable resistant to high temperatures and cuts
  • Ergonomic Wire Layout for even heat distribution

The Santi Heated Flex 2.0 Undersuit is perfect for divers looking for a flexible, lighter heating solution that delivers high-performance warmth and comfort during their dive.

Additional information

Weight 25 kg
Gender

Female, Male

Measuring Guide

HOW TO MEASURE YOURSELF FOR SANTI SUITS

Carefully watch SANTI’s “Instructions for Self-measuring” video below. The video shows all measurements for Made-to-Measure suits.

STEP-BY-STEP

Download the Santi MADE TO MEASURE FORM. Use only a taylor’s tape measure that has a centimeter scale (only use metric with cm).

Never take your own measurements yourself! Measurements should be taken by another person to make sure all measurements are taken tight up to the body and at correct placement for a specific measurement.

It is important that you stand straight, look forward and do not bend over while you are being measured. It is equally important to take the measurements only while wearing thin clothing, close to the body. Don’t leave any additional measurement allowance.

HEAD – approximately 1cm above the eyebrows to choose the correct hood size.
NECK – above the t-shirt line, under the Adam’s apple and the end of the neck.
BODY TRUNK – hold one end of the tape on the central point of the neck end and lead the tape across the crotch to the back. Mark the place where tape ends and measure the rest of the line to the spine neck bone. Make sure the tape is close to the body including all the curves.
SHOULDER TO SHOULDER – back shoulders length from one top arm bone to another.
OUTER ARM LENGHT – from the back neck spine bone to the wrist while the arm is fully stretched.
INSIDE ARM LENGHT – from armpit to wrist.
LADIES ONLY / SIDE TRUNK LENGHT – from the armpit to the waist line.
BICEPS – widest point on the loose arm. If you have a visibly athletic figure it is advised to measure the biceps also with bent elbow.
FOREARM – in the widest point.
WRIST – between the palm and the wrist bone.
CHEST – first measure the chest in rest and then after breathing in air. Normally the difference should be around 3-5cm. For ladies measure in the fullest point of the bust, preferably while wearing a bra.
WAIST – measure on the belly button level. Remember to measure the waist line in the widest point on the belly button line. To measure a female waistline correctly, use any kind of “marker belt” and fasten it around the waist line.
LADIES ONLY / BACK HEIGHT – centrally from the neck spine bone to the waist line marked with the belt.
LADIES ONLY / CHEST HEIGHT – from the soft neck area (where the neck ends) to the bust line in the fullest point.
HIPS – in the fullest point of the buttocks.
THIGH – widest point approximately 5cm from the crotch area.
CROTCH TO KNEE – from crotch to knee.
CROTCH TO FLOOR – hold one end of the measurement tape in a convenient place in the crotch and measure to the heel end.
CALF 1 – measure the calf in the widest point.
CALF 2 – height from the widest point of the calf to the floor.
CALF 3 – measure the calf 20cm from the floor.
ANKLE – measure the ankle on the ankle bone.
FOOT – place the tape on the floor and step on it to measure from end of heal to end of toes.

UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER:
It is the customers responsibility to choose the correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.