Santi Drysuit Connector connects your Santi Heated Vest, Gloves or Undersuit to the battery using your existing drysuit inflation valve on top of the unit (Apeks or SiTech).
E/O cord connector passes through a standard suit inflation valve and provides a power connection from the external battery to a heated product under the drysuit.
The existing drysuit valve is then screwed on top of the connector. Select which (Sitech or Apeks) valve you currently have under options, as the diameter will differ.
- Height: 19mm + standard drysuit inflation valve
- Total length of the cables, including 55 cm
- Available in two diameters: Apeks or Si-Tech
- Works with a power supply no higher than 12VPhoto below depicts how the drysuit inflator (not included) fits into the Drysuit Connector. Screw threads seen underneath are inside the drysuit. Drysuit inflator valve in picture not included – You are required to use your existing valve with the Controller.
Below is a side-by-side comparison of the Santi Drysuit Connector (Right) with drysuit inflator valve attached and the all-in-one lower profile SANTI Thermovalve (left) where the drysuit inflator and the connector are an integral part of the thermovalve body and there is no excess height. Please note the drysuit inflator valve shown on the right is not included.