MPS C1X Sport Line Gas Booster

£3,910.00 + VAT

The MPS C1X Sport Line is a compact, portable and self-contained gas booster built with an innovative system that significantly reduces air consumption during the filling operation.

SKU: GT-MPS-C1X-Sport Category:

MPS TECHNOLOGY BOOSTER C1X SPORT Line

Booster for sport divers, especially in CCR. High performances, reliability and security are his master words.
The benefits of this booster:
Performance: Filling a 3L cylinder from 100b to 220b in 1min30 from a B50 oxygen source at 100b,
Maintenance once a year,
Robustness and reliability,
Protection of the operator,
Supplied completely ready to use.

Overall our boosters include the same security systems:
Heat management: because our boosters are designed for compressed gas, we cool the HP gas. Each time-driven air vents, it produced cold by his decompression, we send this cold gas around the high-pressure chamber to cool the piston chamber and blower gas. This is very different from the remarked Chinese hydraulic pumps that have no temperature management (normal, a liquid can’t be compressed and so does not produce heat), aside finding themselves completely frosted and the second becomes so hot it can’t be touched,
Speed management: the user is able to regulate the number of strokes per minute speed by adjusting the MP of engine air valve,
Deflagration absorption: The high-pressure cylinder base contains a buffer volume that allows reducing the impact of a deflagration in the high-pressure cylinder by 10,
Filtration of oxygen/helium: because the gas manufacturer use massively grease in their industrial systems, we filter gas entering the booster via a filtration stone in the inlet connector, this little stone is to change once or twice a year according to the use of the booster (€2 approx.),
Keep clean the system: we have positioned two non-return valves on each side of the HP chamber, your block gas can not go back to the HP chamber, and the HP gas can not go back in your gas cylinder source,
The gas safety: pushed gas cannot be mixed with the engine gas, two vent stones based on the HP part allow the high-pressure gas to evacuate if a stroke seal is broken,
Programming the booster: it is possible to configure your booster so that it stops working when the required HP pressure is reached (short training),
Specific materials: our boosters are made from serious materials
– the cooling chamber is made of stainless steel 3 mm thickness, reinforced at the base by a 10 mm of Ergal ring,
– our hoses are stainless steel braided with an inner Teflon coating. This allows to never have a deposit of contaminant in the hose unlike the standard rubber hose which inner roughness storing contaminants are regularly the place of flame departure,
– the sealing of the piston is performed with an assembly of o-rings and flat gaskets seals to withstand the heat and reduce friction,
engine air management is performed with an ISO valve (2), scheduled for 10 million cycles, like indestructible within the diving use market. If ever this ISO valve malfunctions, being a standard in the industry, it can be found very easily anywhere in the world.

Additional information

Weight 25 kg

Specifications

Technical data

AIR DRIVEN GAS BOOSTER DOUBLE ACTING – SINGLE STAGE

TRANSMISSION RATIO: 1:39

MAX DRIVE AIR PRESSURE: 6/8 Bar – 87/116 psig

DISPLACEMENT: 2 x 9 cc

MAX OUT PRESSURE: 230 Bar – 3335 psig / 310 Bar – 4500 psig

MIN SUCTION PRESSURE: 5 Bar

AIR DRIVE INLET CONNECTION: Micro Quick Connection 1/4″

AIR DRIVE REGULATOR: HP and LP gauges, Speed Adjust Valve, 3 m Tube with Micro Quick Connection 1/4″, DIN 300

AIR DRIVE HOSE LENGTH: 3 m

GAS INLET CONNECTION : 3 m Stainless Steel Braid Hose, Filter, Needle Valve with Slow Purge, 63 mm 0-400 Bar Gauge, DIN 300 connection

GAS OUTLET CONNECTION: 3 m Stainless Steel Braid Hose, Needle Valve with Slow Purge, 63 mm 0-400 Bar Gauge, DIN 300 connection

WEIGHT: 13.5 Kg

DIMENSIONS: 55.5 x 42.8 x 21.1 cm

MAIN FEATURES:

OXYGEN SERVICE
Technopolimer Water/Dust proof Transport Case
All-in-one filling system
Proportional Relief Valve

Versions
C1X 230 Bar
GBS.09.39.X.230
C1X 310 Bar
GBS.09.39.X.310